Appliance repair in southwest Minneapolis, over the Crosstown

Bungalow and Tudor kitchens from Linden Hills to Kingfield, basement laundry rooms in Kenny and Armatage, and the rental stock of Uptown.

20 min from the shop, no mileage charge$99 to find the fault — folded into the repairSame-day for a warm refrigerator

Mon–Fri 8am–6pm · Sat 9am–3pm · Eden Prairie-based, no mileage charge inside 30 minutes

Tell us what's broken in Minneapolis

We call back with a real arrival window. The $99 diagnostic is folded into the repair price you approve.

$99 diagnostic — folded into the repair you approve. Your details go nowhere else.

On the truck · Minneapolis

Six machines, one truck, Minneapolis

Tap a machine for symptoms, the procedure and local notes.

The route

Working the south side of Minneapolis

Our Minneapolis territory is the wedge between Hwy 62, Hwy 100 and the Chain of Lakes, and we reach it two ways. The Crosstown east to Penn or Lyndale puts us in Armatage, Kenny, Tangletown and Kingfield; Hwy 100 north to 50th Street carries us into Fulton and Linden Hills and around Lake Harriet. Minnehaha Creek winds through the middle of it, and the parkway along the creek is often the fastest way between two calls. North of Lake Calhoun the houses give way to the apartment buildings of Uptown, where the calls come from property managers rather than homeowners. It is the oldest housing we serve, and the technician who works it learns to carry a headlamp and a knee pad.

These are 1910s to 1930s bungalows, Tudors and Craftsman houses with kitchens remodeled into rooms that were not built for modern appliances, basement stairs with a turn at the bottom, and laundry rooms in the corner by the fruit cellar. The water is the big difference from the suburbs: Minneapolis draws from the Mississippi and softens it at the plant, so it arrives moderately hard, there is rarely a softener in the basement, and scale is a slow nuisance rather than the main event. What fails here instead is mechanical and thermal. Dryer vents bored through old foundations ice shut, refrigerators wedged into alcoves overheat, and gas ovens on original piping lose their igniters every autumn.

What south Minneapolis calls about

ApplianceWhat the south side sends us
RefrigeratorsAlcove-mounted units with matted condenser coils, defrost failures on aging French-door models, basement freezers stopping in a cold fruit cellar
WashersBasement machines that will not drain, door locks failing on stacked pairs in Uptown, shocks and suspension worn on uneven slabs
DryersVents through limestone and rim joists frozen shut, gas valve coils dropping out, drum rollers worn flat in thirty-year-old machines
DishwashersRetrofit installs draining badly through a disposal, panel-front latches not registering, heaters open on the rare scaled unit
Ovens & rangesGas oven igniters weakening on old piping, wall ovens from 1960s updates, low voltage on 240-volt circuits added decades ago
Ice makersSaddle valves corroded shut under old floors, fill tubes frozen on exterior walls, door-mounted units frosting in humid summers
Refrigerator

Refrigerator · Linden Hills

A French-door refrigerator in a Linden Hills alcove runs constantly and never gets cold. Rolled out on a mat to protect the maple floor, it shows a condenser coil matted with dog hair and a stalled fan that reads dead on the meter. We clean the coil, replace the fan, and watch the temperature fall before leaving.

Washer

Washer · Kingfield

A top-loader at the bottom of a Kingfield basement stair fills and agitates but never spins. The lid switch is broken where a plastic tab snapped. Bringing the machine upstairs is impossible, so the repair happens in place on a drop cloth with a truck-stock switch, and the washer spins a full load before the ticket is written.

Dryer

Dryer · Tangletown

A gas dryer in a 1926 Tangletown basement runs cold every February. The vent exits through the limestone wall to a flap buried in a snowdrift, and the lint behind it has frozen into a plug. We clear the run, test the igniter and coils, and suggest a hood that sits higher above the grade before the next winter.

Dishwasher

Dishwasher · Uptown

A property manager for a converted duplex near Hennepin and Lake Street reports a dishwasher holding water. The tenant hosts. Under the sink the drain hose has no high loop and the disposal is packed. We clear the sump, rehang the hose, text the written price to the owner, and email the invoice and warranty.

Every repair in Minneapolis, on its own page

Minneapolis questions

Which parts of Minneapolis do you cover?

The southwest and south side, roughly everything between Hwy 62, Hwy 100 and the Chain of Lakes: Linden Hills, Fulton, Lynnhurst, Kenny, Armatage, Tangletown, Kingfield, the streets around Lake Harriet and Minnehaha Creek, and the Uptown rental buildings. Addresses farther north or east of I-35W are outside the area we can reach reliably from Eden Prairie.

Does Minneapolis city water change how appliances fail?

Yes. Minneapolis softens its Mississippi River water at the plant, so it reaches your Kenny or Fulton kitchen moderately hard, without the scale load that suburban wells put on dishwashers and ice makers. Our Minneapolis calls lean toward frozen vents, worn mechanical parts, retrofit plumbing and failing igniters rather than mineral problems.

Can you get an appliance out of a narrow Minneapolis basement?

We plan not to. Old Minneapolis stairs with a landing and a turn are the norm, so washers, dryers and basement freezers are repaired where they stand on a drop cloth. Nearly every pump, lock, valve, belt, heater and roller can be replaced in place, and the failed part leaves in a bag rather than the machine leaving on a dolly.

How do you handle Uptown rental buildings?

The property manager or owner books the visit, the tenant lets the technician in, and the written price goes to whoever pays by text for approval. Invoice and written warranty are emailed the same day. The $99 diagnostic is folded into an approved repair, and a declined repair costs $99 with no trip or mileage charge added.

Nearby

Also on the route

How a visit goes

Four steps from broken to tested

1

Reach out

Call (763) 342-9995 or send the form. You get a callback with a real arrival window, and a text when the truck is on its way.

2

Diagnosis with a meter

The technician tests the machine, names the failed part in plain words, and writes one flat price. The $99 is already inside it.

3

Repair from the truck

We stock the parts that actually fail in west-metro homes, so most jobs close the same visit; an ordered part comes back with no second trip fee.

4

Tested, tidy, in writing

Full test cycle before we pack up, a clean work area after, and a written warranty on the invoice.

Minneapolis: call now.

20 minutes from the shop, no mileage charge. $99 diagnostic, one written number, written warranty.

Online Request service 📞